ZP30-13旋转式压片机

ZP30-13旋转式压片机

ZP30-13 Rotary Tablet Press

用途说明

本机适用于食品、医药、化工、电子等其他工业将颗粒状原料压制成圆形片/块/球及环形片等形状。不适用于半固体，潮湿颗粒，低溶性、吸湿性原料和无颗粒及细粉末物料的压制。本机符合GMP标准要求。冲杆与冲钉为组合式，更换不同规格的形腔只需另订购冲钉即可。

Application

The machine is suitable for pressing of granule material into round/ lump/annular tablets in foodstuff, chemical, electronic and other industries, but can not be used for the pressing of semi-solid, wet, low solubility, hygroscopic or fine powder materials. The machine is built according to the requirements of GMP.The drill drift and drift pin are in combined type. If you want to change the specification, you just need to order drift pin of different specification.

工作原理和结构特征

1、本机传动：电动机（由变频器控制无级调速）→带轮传动→蜗杆传动→由主轴带动转台作顺时针旋转。

2、本机的压片工艺流程为连续进行加料、充填、压片和出片。

3、本机工作时，转台带动13付冲模作顺时针旋转，上下冲模沿曲线轨道做上下升降运动，并通过压轮来完成压力动作。

4、上下压轮装置采用滚动摩擦，有利于减少工作阻力，降低功率消耗。

5、压轮的安全卸荷装置在下压轮轴上，由弹簧平衡，其工作压力由弹簧套调整，超压时弹簧套自动跳动卸荷，电柜上的报警装置会发出报警信号，这样有利于压力稳定，减少冲击和震动，又起到保护冲杆的作用。

6、充填、片厚和转速等各部分控制调节均实行集中控制，易于操作。

7、本机采用封闭式浸油润滑的蜗杆、蜗轮传动，以减少功率损耗，延长其使用寿命。

8、本机的外围部件采用全封闭结构，使密封的压片室和驱动机构完全分开，又可防止粉尘飞扬且避免了油污的交叉污染。

9、本机的电气控制采用变频无级调速，操作方便、直观，操作面板简洁、明了。

10、装有除尘器，可以自动清除灰尘。

Working Principle and Characteristics

1. Machine drive: motors (step-less speed regulation is controlled by inverters) → pulley driven→ worm driven→ turntable driven by the spindle for rotating clockwise.

2. The technological process for tablet pressing of this machine is material feeding, filling, tablet pressing and tablet out continuously.

3. When working, turntable with 13 sets die drives for rotating clockwise. Dies move up and down along the curve track, and complete pressing movement through the pressure roller.

4. Friction installations of up and down roller will help reduce resistance and lower power consumption.

5. The safety roller unloading device on the below axle pressure by a spring balance. Their working pressure is adjusted by the spring. When over-pressure occurs, the spring housing will automatically unload, and electric cabinet will issue the warning alarm signal, so as to stabilize pressure, reduce shock and vibration, and at the same time protect the punch.

6. Filling, film thickness, rotational speed and other various parts are regulated by centralized control unit for easy operation.

7. Submerged lubrication is used for the worm and worm gear to reduce power loss and extend service life.

8. The external part of the machine is fully-enclosed, so that sealed pressing rooms and drive mechanism are entirely separated from each other to prevent dust and avoid cross-contamination l.

9. The electric control unit uses variable frequency step-less speed regulation for easy operation, operation panel is simple and clear.

10. Dust collector is installed to remove dust automatically.

技术参数

Technical Parameters