单温区回转炉 BTF-1200C-R/Single zone rotary tueb furnace
产品关键词：回转 负极材料· 高温
- 产品名称：单温区回转炉 BTF-1200C-R/Single zone rotary tueb furnace
- 产品编号：
- 产品商标：BEQ
- 产品规格：空
- 参考价格：面议
- 更新时间：2021/5/12 9:38:26
- 点击次数：2943次
主要特点Main features:
1) The tube can be rotated 360 degrees.
炉管可旋转360度
2)Quartz blocking pieces inner wall of tube can help the powder material turn over, and the sintering is more uniform.
管内壁设有石英挡片帮助粉料翻转，有助材料烧结更均匀
3)Widely used to calcine and dry for battery material, non-strong alkali powder material ,granular material
广泛应用于电池正负极材料，无强酸碱性粉体材料，颗粒状物料。
4)can supply vacuum or gas protection experiment environment.
可在真空下或气氛保护下进行烧制
技术参数Technical Parameters：
|
Power 输入电源 |
Power rated: 5KW (208-240V) 额定功率：5KW (208-240V) |
||||
|
Main transmission power 主传动功率 |
0.04KW |
||||
|
Linear actuator power 电动推杆功率 |
0.04KW |
||||
|
Voltage 电压 |
Voltage rated: AC208-240V 50/60HZ 额定电压： AC208-240V 50/60HZ |
||||
|
Working Temperature 工作温度 |
Max. Temperature: 1200℃( 1 hr) *高温度：1200℃ (1小时) Continuous working temperature: ≤1100℃ 持续工作温度：≤1100℃ Heating Rate: ≤50℃/min 升温速率：≤50℃/分 |
||||
|
Temperature Controller 控温方式 |
PID automatic control and auto-tune function. 模糊PID控制和自整定调节 30 programmable segments for precise thermal processing. 智能化30段可编程控制 Built-in protection for the over-heated and broken thermocouple. 超温和断偶报警功能 |
||||
|
Length of heating zone 加热区长度 |
440mm |
||||
|
Length of constant zone 恒温区长度 |
200mm |
||||
|
Heating Elements 加热元件 |
Resistance wire, Fe-Cr-Al Alloy doped by Mo 电阻丝（掺钼铁铬铝合金） |
||||
|
Temperature Accuracy 控温精度 |
+/- 1℃ |
||||
|
Processing tube 炉管 |
Tube size: Shaped,Φ60*420 (two ends) + 100 * 360 (middle) mm 炉管尺寸：异形，Φ60*420（两端）+100*360（中间）mm Two tube blocks are included for blocking heat radiation generated from tube center, must be fully inserted into the furnace chamber before heating in correct position(quartz or ceramic are optional). 两个管堵阻挡管中心产生的热辐射，管堵必须在加热前塞进炉膛的正确位置（石英或氧化铝管堵可选） |
||||
|
Dimensions 尺寸 |
Overall size: 1300*600*1230mm (L*W*H) 外形尺寸：1300*600*1230mm (长*宽*高) |
||||
|
Inclinable angle 可倾斜角度 |
0-40 degree (adjustable) 0-40度(可调) |
||||
|
Rotate rate 炉管转速 |
3-13 round/min (adjustable) 3-13转/分(可调) |
||||
|
Net Weight 净重 |
90kg |
||||
|
真空法兰 |
KF25 quick clamp flange 两端为KF25快速卡箍法兰 |
||||
|
Vacuum Pressure 真空压力 |
1pa can be achieved by mechanical pump 机械泵可达1pa 10^-4 pa can be reached by molecular pump 分子泵可达10^-4pa Please click the picture below to order vacuum parts 点击下列图片订购真空部件 |
||||
|
Warranty 质保 |
One year limited warranty with lifetime support (Such consumable parts as tube, quartz block, and O-rings, etc. are NOT supported by the warranty) 一年质保终身支持（消耗品如炉管，石英管堵，O型圈等不在质保范围内） |
||||
|
Warning 注意事项 |
Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating. 在使用过程中炉膛表面可能出现细小裂纹。这是正常情况，裂纹可以用氧化铝涂层修复。 |
||||
|
Compliance * |
CE Certified CE* The furnace is ready to pass TUV (UL61010) or CSA certification at extra cost. 可付费进行TUV(UL61010)或CSA* |
