进口卫生级负压泵(欧美进口品牌)

英国GRIMM格林进口卫生级负压泵 UK GRIMM Imported sanitary negative pressure pump

英国GRIMM格林进口卫生级负压泵概述： 

          进口卫生级负压泵属于涡轮导流离心式负压泵，可以负压0.09Mpa的压力下，抽取、输送真空容器罐内的液体物料。广泛使用于蒸发浓缩器、真空浓缩设备、降膜蒸发器系统中。负压泵材质由304或316L不锈钢制造而成。 

          应用现代新技术和新概念不断革新涡轮导流离心负压泵的生产工艺。新一代卫生级离心泵是英国格林的骄傲。因为它除了符合GMP要求，传统的质量外。为用户提供的泵性能更好，效率更高，使用寿命更长，用户受益更大。

英国GRIMM格林进口卫生级负压泵特点： 
             进口卫生级负压泵属于涡轮导流离心负压泵，可以在负压0.09Mpa压力下，抽取真空罐里的液体。在处理过程中满足卫生要求，柔和不损伤物料，并具抗化学物性能强光泵业所有与物料接触的部分均使用SUS304,SUS316L的材质。其标准配置包括外壳和泵脚。卫生级负压泵是在标准离心泵基础上设计的高压泵，适用于高进口压力场合，可承受高达40bar的进口压力。本泵是设计开式叶轮,内部镜面抛光、无死角、清洗后无滞留物、噪音低。

英国GRIMM格林进口卫生级负压泵技术参数： 
规　　格：3T-180T, 0.75KW-75KW
材　　质：SUS304 SUS316L (在材料的选用上泵体、泵盖、叶轮等凡与物料接触之零件由SUS316L或SUSI304不锈钢制造)
标　　准：DIN、 SMS
叶　　轮：分开式叶轮和半闭式叶轮。
表面处理：接液部分抛光，其余亚光或喷砂处理。
工作条件：卫生离心泵属高低液位几水平输送，有一定吸力。 
zui大进口压力：0.5MPa
温度范围：-10°C至+140°C(EPDM)
可冲洗机械密封：
       水压：zui高0.1MPa
       水量：0.25-0.5L/min

表面处理：内接液部分抛光，其余亚光或喷砂处理
内表面处理：抛光
连接方式：螺纹活接，卡箍，法兰
过液密封材料：乙丙橡胶(EPDM)，硅橡胶

应　　用：属于涡轮导流离心负压泵，可以在负压0.09Mpa压力下，抽取真空罐里的液体。

英国GRIMM格林进口卫生级负压泵电机：
1、根据配置主要采用“ABB,西门子,东元”品牌的三相交流电机，按照国际电工委员会IEC60034.IEC60072标准设计制作，符合欧共体“CE”标记要求。
2、可供选用防爆电机，以满足不同场合的需要。
3、优越的电气性能、低噪音、低震动，电机的标准设计防护等级为IP55，绝缘等级为F级。
4、工作电压：
      ≤3Kw,220-240V/380-420V,△/Y
      ＞3Kw,380-420V/660-690V,△/Y
5、频率：50Hz/60Hz
6、工作方式：连续（SI）
7、转速：标准泵的转速为2900r/min 
英国GRIMM格林进口卫生级负压泵应用：
药品类：输液，蒸馏水，高纯水，含颗粒3-6毫米的中药液体，浸出液；

化妆品类：染料，酒精，香精油；

乳品类：乳清，奶油，牛奶，糖液；

饮料类：酒精，白酒，啤酒，麦芽汁， 发酵液，果汁饮料，带颗粒饮料；

其它：糖果业，焙烤业，化工领域等。

UK GRIMM Imported sanitary negative pressure pump summary:

           The imported sanitary negative pressure pump belongs to the turbine guiding centrifugal negative pressure pump. It can extract and transport the liquid material in the vacuum container under the pressure of negative pressure 0.09Mpa. Widely used in evaporation concentrator, vacuum concentrating device, evaporator system. The material of negative pressure pump is made of 304 or 316L stainless steel.

        With modern new technology and new concept, the production process of turbine guided centrifugal negative pressure pump is continuously improved. A new generation of sanitary centrifugal pumps is the pride of Green. Because it meets the GMP requirements, outside of the traditional quality. To provide users with better performance, higher efficiency, longer service life, users benefit more.

UK GRIMM Imported sanitary negative pressure pump characteristic:

           The imported sanitary negative pressure pump belongs to the steam turbine centrifugal negative pressure pump. It can extract the liquid in the vacuum tank under the negative pressure of 0.09Mpa. In the process to meet health requirements, soft, no damage to the material, and with chemical resistance, light pump all parts of contact with materials are using SUS304, SUS316L material. Its standard configuration includes housings and pump feet. Sanitary negative pressure pump is a high pressure pump designed on the basis of standard centrifugal pump. It is suitable for high inlet pressure occasions and can bear up to 40bar of inlet pressure. The pump is designed to open impeller, the internal mirror polishing, no dead angle, cleaning after no detention, low noise.

UK GRIMM Imported sanitary negative pressure pump technical parameters:

Specification: 3T-180T, 0.75KW-75KW

Material: SUS304 SUS316L (in the selection of materials of the pump body, pump cover, impeller and other parts all contact with the material of stainless steel made by SUS316L or SUSI304)

Standard: DIN, SMS

Impeller: split impeller and semi closed impeller.

Surface treatment: wetted parts polishing, the matte or sandblasting.

Working conditions: sanitary centrifugal pump is of high and low liquid level. It has a certain suction.

Maximum inlet pressure: 0.5MPa

Temperature range: -10℃ to +140℃(EPDM)

Washable mechanical seal:

        Water pressure: maximum 0.1MPa

        Water quantity: 0.25-0.5L/min

Surface treatment: the remaining portion of the polishing liquid inscribed, matte or sandblasting

Internal finish: polishing

Connection: thread, live, clamp, flange

Liquid sealing material: ethylene propylene rubber (EPDM), silicone rubber

Application: it belongs to turbine centrifugal centrifugal pump, which can extract liquid from vacuum tank under negative pressure 0.09Mpa pressure.

UK GRIMM Imported sanitary negative pressure pump electric machinery:

1.According to the configuration, mainly using "ABB, SIEMENS, East yuan" brand three-phase AC motor, according to the International Electrotechnical Commission IEC60034.IEC60072 standard design and production, in line with EC "CE" mark requirements.

2.Explosion-proof motor can be used to meet the needs of different occasions.

3.Superior electrical performance, low noise, low vibration, motor standard design, protection level is IP55, insulation class is F level.

4.Work voltage:

            3Kw, 220-240V/380-420V, /Y

            3Kw, 380-420V/660-690V, /Y

5.Frequency: 50Hz/60Hz

6.Work: continuous (SI)

7.Speed: standard pump speed of 2900r/min

UK GRIMM Imported sanitary negative pressure pump application:

Medicine: infusion, distilled water, high pure water, containing 3-6 millimeters of Chinese medicine liquid, leaching solution;

Cosmetics: dyes, alcohol, essential oils;

Dairy products: milk, cream, whey, sugar;

Beverages: alcohol, spirits, beer, wort, fermented juice, fruit juice, and soft drinks;

Others: Confectionery, bakery, chemical, etc.