进口变量叶片泵(欧美进口品牌)
- 产品名称:进口变量叶片泵(欧美进口品牌)
- 产品编号:
- 产品商标:GRIMM
- 产品规格:空
- 参考价格:面议
- 更新时间:2020/12/14 14:25:19
- 点击次数:186次
英国GRIMM格林进口变量叶片泵 UK GRIMM Inlet variable vane pump
英国GRIMM格林进口变量叶片泵概述:
进口变量叶片泵属限压式变量叶片泵,具有压力调整装置和流量调整装置。泵的输出流量可根据负载变化自动调节,使其输出功率与负载工作速度和负载大小相适应,具有高效、节能、安全可靠对特点,特别适用于作容积调速的液压系统中的动力源,如金属切削机床、压力机械、皮革机械、液压站等。
英国GRIMM格林进口变量叶片泵主要特点:
1、具有压力调整和流量调整装置,压力和流量都可以调整。
2、当系统压力高于泵调定压力时流量减少,使功率损失降为zui低,效率高,安全可靠。
3、侧板采用液压平衡,可获得更好的容积效率。
4、采用数种隔音、防震的措施、低噪音、无震动。
英国GRIMM格林进口变量叶片泵技术参数:
流 量:8-40L/min
压 力:3.5-7.0MPa
转 速:800-1800r/min
驱动功率:0.7-5.8kw
配管尺寸:进口:1"、1 1/2"
出口:3/4"、1 1/4"
英国GRIMM格林进口变量叶片泵适用范围:
适用于金属切削机床、压力机械以及其它有变量或保压要求的液压系统。
UK GRIMM Inlet variable vane pump summary:
The inlet variable vane pump belongs to a variable pressure variable vane pump with a pressure adjusting device and a flow regulating device. The pump output flow can be adjusted automatically according to the change of load, the output power and load speed and load size to adapt, with high efficiency, energy saving, safe and reliable characteristics of the power source of the hydraulic system, especially suitable for the volume control, such as metal cutting machine tools, machinery, leather machinery, hydraulic pressure station etc..
UK GRIMM Inlet variable vane pump main features:
1. With pressure adjustment and flow adjustment device, pressure and flow can be adjusted.
2. When the system pressure is higher than the pump setting pressure, the flow rate is reduced, the power loss is reduced to the minimum, the efficiency is high, the safety is reliable.
3. The side plate adopts hydraulic balance, which can achieve better volumetric efficiency.
4. Adopt several kinds of sound insulation, shockproof measures, low noise, no vibration.
UK GRIMM Inlet variable vane pump technical parameter:
Flow rate: 8-40L/min
Pressure: 3.5-7.0MPa
Speed: 800-1800r/min
Driving power: 0.7-5.8kw
Tubing size: Imports: 1", 1 1/2"
Exports: 3/4", 1 1/4"
UK GRIMM Inlet variable vane pump scope of application:
Applicable to metal cutting machines, pressure machines, and other hydraulic systems with variable or holding requirements.