进口三柱塞高压隔膜往复泵(欧美进口品牌)

英国GRIMM格林进口三柱塞高压隔膜往复泵 UK GRIMM Imported three plunger high pressure diaphragm reciprocating pump

英国GRIMM格林进口三柱塞高压隔膜往复泵概述： 

          进口三柱塞高压隔膜往复泵是英国格林为适应市场需求，按照国际标准API674标准设计，许多*一直代表着**。产品满足极为苛刻的工况要求，能精准可靠地输送物料，满足这一类型泵产品的zui高要求。
          具有紧凑结构的往复泵在设备制造领域尤为受到青睐，这得益于英国格林扎实的技术基础。过程隔膜泵的设计确保在输送苛刻、有毒、可燃或腐蚀介质时绝无泄露，而不受各个领域不同要求的限制。

英国GRIMM格林进口三柱塞高压隔膜往复泵特点：

产品特点： 

 

1、模块化结构，结构紧凑，体积小，重量轻； 
2、润滑性好，摩擦系数小，效率高；
3、动力端传动平稳可靠、噪音小；
4、组装形式：卧式、立式、固定式、移动式；
5、动力源：电动机、柴油机、太阳能；
6、减速机型式：双斜齿轮式、蜗轮蜗杆式、减速机式、皮带轮式；
7、过流材料有合金钢、不锈钢、双相钢、钛、哈氏合金等；
8、根据客户要求个性化设计。

双斜齿轮减速机构的特点：
1、低轴力，自我调整，轴承使用寿命长；
2、特殊的柱塞定线设计和 短小的十字头设计，结构紧凑，传输精度高；
3、双斜齿轮提供了非常简洁的设计和zui大效率，这种设计使占用面积zui小化和功率zui低化；
4、由于设计带有双斜齿轮，使得曲柄轴和小齿轮轴免于轴的负载，平调的传输装置使得寿命长和低噪音；
5、曲柄轴经锻造和喷丸硬化处理，减小应力，使得结构坚固，疲劳强度高；
6、往复的压力推进润滑油作用于十字头销和连杆滑动轴承，不需要额外的润滑系统；
7、齿轮由压力和温度开关检测，因此预防了低油位和超载；
8、所有油密封可以从外部维修从而使得维修简便，维修不需要放油。
柱塞式液力端的特点：
1、柱塞采用航空金刚玉喷涂工艺，摩擦小，硬度高；密封采用进口盘根配合特殊的内隔套结构，降低液力端的泄露。
2、模块化设计，不拆泵头，管路即可直接更换填料，柱塞，单向阀，大大降低了用户的维护成本。
3、双导向组合阀组，由耐磨耐腐材料制成，采用真空淬火工艺，工作准确，分为迅速，寿命长。
4、采用弹簧驱动密封填料，使得密封效果好，使用寿命长。
过程隔膜式液力端的特点：
       过程隔膜泵是英国格林在原有先进计量泵的结构基础上研制而成，产品融合了液压隔膜泵及柱塞泵的优点，结构紧凑、效率高、承载压力高，克服柱塞泵易腐蚀、易泄露的缺点。
1、采用隔膜将输送介质和液压油完全隔开，保证绝无泄露。适用于有腐蚀性、剧毒性、精度要求比较高的场合。
2、排气阀可以自动放出隔膜腔及油箱内的空气。
3、补偿阀能及时补充隔膜腔内的液压油，保持隔膜腔的油量稳定，确保泵的计量精度。
4、液压驱动油路采用全封闭式设计，杜绝灰尘杂物侵入及人员操作时损坏油路的畅通和安全。
5、双隔膜泵：具有隔膜泵的一切优点，并具备隔膜破裂检测装置，，在一片隔膜破裂的情况下，另一片膜片可继续工作，同时隔膜破裂检测装置可发出报警信号，适用于输送有毒、易燃易爆及强腐蚀等危险介质。
6、金属液压隔膜式泵头，用于高温、高压场合，zui高使用温度可达451℃，压力可达70MPa。
变频调节，通过变频器调节电机电源的频率，控制电机的转速，从而改变泵的次数来调节泵的流量。
多联往复泵的特点：
1、多泵头设计，有效降低脉冲，更适用于大流量高压力，长期稳定运行。
2、模块化设计，不拆泵头及管路，可以直接更换填料，大大降低用户的维护成本。
3双斜齿轮提供了非常简洁的设计和zui大效率，这种设计占用面积zui小化和功率zui低化。
4、可根据工况需要做成多泵头高压力的过程隔膜泵。
星型立式往复泵的特点：
1、该泵采用了单拐曲轴驱动环状分布的往复传动组件立式结构，结构简单，易于加工，绝无泄露。
2、承载力大，使用寿命长，稳定性强，维修方便。
3、机械效率高，摩擦小，节能环保。
4、多方位立体化安装，不受空间限制，更适合海上平台、油气田等。
5、亦称为直立工作的多柱塞高压往复泵。

英国GRIMM格林进口三柱塞高压隔膜往复泵技术参数： 

 

流量范围：0.1-83m3/h
工作压力：0-80MPa
电机功率：0.75-450kw
泵  行  程：40-175mm
柱塞直径：15-88mm

 

 

英国GRIMM格林进口三柱塞高压隔膜往复泵应用： 

             适用于做管道清洗、工件清洗、表面清洗、清砂、除锈、液体输送、液体传动、工程掘进等，以及各种胶管、金属管、油田钻井井口设备试压用泵，即可泵送清水、乳化液，亦能泵送其它具有化学性质的液体。

UK GRIMM Imported three plunger high pressure diaphragm reciprocating pump summary:

          Imported three plunger high pressure diaphragm reciprocating pump is the United Kingdom Green in order to meet market demand, according to international standards, API674 standard design, many patents have been representing the world advanced level. Products to meet the extremely demanding conditions, accurate and reliable delivery of materials to meet the highest requirements of this type of pump products.

        The reciprocating pump with a compact structure is especially popular in the field of equipment manufacturing, thanks to the solid technical foundation of Green. The design of the process diaphragm pump ensures no leakage in harsh, poisonous, flammable or corrosive media without restriction from various fields.

 

UK GRIMM Imported three plunger high pressure diaphragm reciprocating pump characteristic: 

Product features:

 

 

 

 

 

 

 

 

 

1. Modular structure, compact structure, small size, light weight;

2. Good lubricity, low friction coefficient and high efficiency;

3. The power transmission is stable and reliable with little noise;

4. Assembly forms: horizontal, vertical, fixed, mobile;

5. Power source: motor, diesel engine, solar energy;

6. Deceleration type: double helical gear, worm gear, gear reducer, belt wheel type;

7. Over current materials include alloy steel, stainless steel, dual phase steel, titanium and Hastelloy alloy;

8. Personalized design according to customer requirements.

Features of double helical gear reduction mechanism:

1. Low axial force, self adjustment, long bearing life;

2. Special plunger alignment design and short cross head design, compact structure, high transmission accuracy;

3. Double helical gears provide very compact design and maximum efficiency. This design minimizes footprint and power minimization;

4. Because of the design with double helical gears, the crank shaft and the pinion shaft from the shaft load transmission device makes the level of long life and low noise;

5. The crankshaft is treated by forging and shot peening, which reduces the stress and makes the structure strong and the fatigue strength high;

6. Reciprocating pressure boosting lubricating oil acts on crosshead pin and connecting rod sliding bearing without additional lubrication system;

7. The gear is detected by pressure and temperature switch, so low oil level and overload are prevented;

8. All oil seals can be maintained externally so that maintenance is simple and no oil is required for maintenance.

Characteristics of plunger type hydraulic end:

1. The plunger adopts the aviation diamond spraying process, small friction, high hardness; sealed imported packing, with special internal separation sleeve structure, reducing the leakage of hydraulic side.

2. Modular design, without dismantling the pump head, the pipeline can be directly replaced by packing, plunger, one-way valve, greatly reducing the user's maintenance costs.

3. Double guiding combination valve, made of wear-resistant and corrosion-resistant material, adopts vacuum quenching technology. The work is accurate, divided into quick and long life.

4. The use of spring driven sealing filler, so that the sealing effect is good, long service life.

The characteristics of the diaphragm hydraulic end:

The process of diaphragm pump is based on the original structure of the British Green advanced metering pump on the development, the product combines the advantages of hydraulic diaphragm pump and piston pump, compact structure, high efficiency, high bearing pressure, overcome piston pump corrosion, leakage faults.

1. The use of diaphragm, the transmission medium and hydraulic oil completely separated, to ensure that no leakage. The utility model is suitable for occasions with corrosive, poisonous and high precision requirements.

2. The exhaust valve can automatically release the air in the diaphragm cavity and the tank.

3. The compensation valve can be added in time to the diaphragm cavity hydraulic oil, to maintain the diaphragm cavity oil volume stability, to ensure the accuracy of the pump measurement.

4. Hydraulic drive oil circuit adopts full closed design, prevent dust, sundries invasion and personnel operation, damage to the smooth and safety of the oil circuit.

5. Double diaphragm pump has all the advantages of the diaphragm pump, and has the detection device in a diaphragm rupture, rupture of diaphragm case, another diaphragm can continue to work at the same time the diaphragm rupture detection device can send out alarm signals, suitable for conveying toxic, flammable and corrosive dangerous medium.

6. Metal hydraulic diaphragm pump head, used in high temperature, high pressure occasions, the maximum use temperature of 451 degrees, the pressure of up to 70MPa.

Variable frequency regulation, through the frequency converter to adjust the motor power frequency, control the speed of the motor, thereby changing the number of pumps to adjust the flow of the pump.

Characteristics of multiple reciprocating pumps:

1. Multi pump head design, effectively reduce the pulse, more suitable for large flow, high pressure, long-term stable operation.

2. Modular design, without dismantling the pump head and piping, you can directly replace the filler, greatly reducing the user's maintenance costs.

3. Double helical gears provide very compact design and maximum efficiency, this design minimizes area and minimizes power.

4. According to the process of diaphragm pump condition made of multi pump pressure head.

Characteristics of star vertical reciprocating pump:

1. The pump adopts a single crank driven ring distribution of reciprocating transmission components, vertical structure, simple structure, easy to process, no leakage.

2. Bearing capacity, long service life, stability, convenient maintenance.

3. High mechanical efficiency, small friction, energy saving and environmental protection.

4. Multi-directional three-dimensional installation, free from space constraints, more suitable for offshore platforms, oil and gas fields.

5. Also known as the vertical work of multi plunger high-pressure reciprocating pump.

UK GRIMM Imported three plunger high pressure diaphragm reciprocating pump technical parameter:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Flow range: 0.1-83m3/h

Work pressure: 0-80MPa

Motor power: 0.75-450kw

Pump stroke: 40-175mm

Plunger diameter: 15-88mm

UK GRIMM Imported three plunger high pressure diaphragm reciprocating pump application:

 

 

 

 

 

 

          Suitable for oil field water injection pump, injection pump, feeding pump, butylene glycol ammonium carbamate pump, liquid ammonia pump, copper acetate, ammonia pump pump, liquid carbon dioxide phosphate amine alcohol injection pumps, pump, oil refining and hydrogenation of coal water slurry pump, diaphragm pump, tubing cleaning pump, pump, high pressure and ultra high pressure chemical cleaning pump, flow pump, salt water injection pump, liquid methanol pump and metallurgy with high-pressure water descaling pump, hydraulic machine with high pressure pump etc..