进口塑料磁力泵(欧美进口品牌)

英国GRIMM格林进口塑料磁力泵 UK GRIMM Imported plastic magnetic pump

英国GRIMM格林进口塑料磁力泵概述:
          进口塑料磁力驱动泵(简称磁力泵)是将永磁联轴器的工作原理应用于离心泵的新产品，设计合理，工艺先进、具有全密封、无泄漏、耐腐蚀等特点，其性能达到英国格林同类产品的*。
          进口塑料磁力泵由泵、磁力传动器、电动机三部分组成。关键部件磁力传动器由外磁转子、内磁转子及不导磁的隔离套组成。当电动机带动外磁转子旋转时，磁场能穿透空气隙和非磁性物质，带动与叶轮相连的内磁转子作同步旋转，实现动力的无接触传递，将动密封转化为静密封。 
          进口塑料磁力泵以静密封取代动密封，使泵的过流部件处于完全密封状态，彻底解决了其他泵机械密封无法避免的跑、冒、滴之弊病。磁力泵选用耐腐蚀、高强度的工程塑料、钢玉陶瓷、不锈钢等作为制造材料，因此它具有良好的抗腐蚀性能，并可以使被输送介质免受污染。

英国GRIMM格林进口塑料磁力泵特点:
            进口塑料磁力泵以增强聚丙烯为主要材料，泵的过流零部件均为注塑成型，能耐大多数的有机和无机酸、碱和盐类溶液，也适于在室外大气中暴 露，对应力腐蚀破裂的抗蚀性良好。

英国GRIMM格林进口塑料磁力泵技术参数:
流       量：0.9-12.5m3/h
扬       程：3-32m

进出口径：进口直径：10~65mm

                  出口直径：8~50mm

汽蚀余量：3.5-7.8m
转       速：2900r/m
电机功率：0.025~7.5kw
适用介质：有机和无机酸、碱和盐类溶液 
电       压：220/380V
材       质：增强聚丙烯、氟塑料

英国GRIMM格林进口塑料磁力泵用途:
             进口塑料磁力泵结构紧凑、外形美观、体积小、噪音低、运行可靠、使用维修方便。可广泛应用于化工、制药、石油、电镀、食品、电影照相洗印、科研机构、国防工业等单位抽送酸、碱液、油类、稀有贵重液、毒液、挥发性液体，以及循环水设备配套、过滤机配套。特别是漏、易燃、易爆液体的抽送，选用此泵则更为理想。

UK GRIMM Imported plastic magnetic pump summary:
           Imports of plastic magnetic drive pump (magnetic pump) is a new product, the working principle of permanent magnet coupling used in centrifugal pump has reasonable design, advanced technology, full seal, no leakage, corrosion resistance, and its performance have reached the advanced level of similar products in Britain Green.

        The import of plastic magnetic pump consists of a pump, magnetic actuators, motors of three parts. Key components of magnetic actuator by the external magnetic rotor sleeve, inner magnetic rotor and non magnetic components. When the motor drives the outer magnetic rotor, the magnetic field can penetrate the air gap and non-magnetic material, driven by the magnetic rotor and impeller connected for synchronous rotation, to achieve non-contact power transmission, the dynamic seal into static seal.

        Imported plastic magnetic pump to static seal instead of dynamic seal, so that the flow of pump components in a fully sealed state, completely solved the other pump mechanical seals can not avoid running, taking, and dropping defects. Corrosion resistance, high intensity magnetic pump selection of engineering plastics, corundum ceramic, stainless steel and other materials for manufacturing, so it has good corrosion resistance, and can be transported from the contaminated medium.

UK GRIMM Imported plastic magnetic pump characteristic:

           The import of plastic magnetic pump with reinforced polypropylene as the main material, flow through pump parts adopt injection mould with resistance to most organic and inorganic acid, alkali and salt solution, also suitable for exposure to outdoor air, the corrosion resistance of stress corrosion cracking good.

UK GRIMM Imported plastic magnetic pump technical parameters:

Flow rate: 0.9-12.5m3/h

Lift: 3-32m

Inlet and outlet diameter: Inlet diameter: 10~65mm

                                        Outlet diameter: 8~50mm

Cavitation: 3.5-7.8m

Speed: 2900r/m

Motor power: 0.025~7.5kw

Applicable medium: organic and inorganic acid, alkali and salt solution

Voltage: 220/380V

Material: reinforced polypropylene, fluoroplastic

UK GRIMM Imported plastic magnetic pump purpose:

           Imported plastic magnetic pump, compact structure, beautiful appearance, small size, low noise, reliable operation, convenient use and maintenance. Can be widely used in chemical, pharmaceutical, petroleum, unit of electroplating, food, film, photographic development research institutions, national defense industry pumping acid, lye and oil, rare valuable liquid, venom, volatile liquid, and circulating water equipment, filter. In particular, leakage of inflammable and explosive liquids pumping, use this pump is more ideal.