广东涂料分散缸 不锈钢拉缸 油漆油墨搅拌缸

概       述：拉缸主要作为小批量生产搅拌容器和小批量物料临时存放之用，设备材质选用不锈钢材料，焊接采用氩弧焊，焊缝处理美观；内外表面镜面抛光处理，易于清洗；底部带有倾斜角，出料干净，无残留；底部侧边带有出料阀，连接管路出料方便；上部可配有盖子，防止搅拌过程物料飞溅和溶剂类产品的挥发。

特       点：根据工艺要求，设备可做成双层或三层拉缸形式，带有夹套和保温隔热层，可加热或冷却；根据搅拌要求，可制作碟型封头拉缸，底部为圆角，避免了搅拌过程中产生死角；根据生产要求，可制作成带有万向脚轮和刹车装置（移动方便，可随时固定）或带叉车槽拉缸（可用叉车进行移动或提升出料，大大减少了员工的操作强度，更利于车间生产管理）。

设备容积：50-2000 L

设备材质：201/304/316不锈钢  

Stainless steel container For small batch production and small batch mixing container used for temporary storage of materials, It made of stainless steel material, welded by argon arc welding, welding processing is beautiful; the inside and outside surface of mirror polishing, easy cleaning; at the bottom with a tilt angle, discharge clean, no residue; the bottom side is provided with a discharge valve and connecting pipe thematerialeasy can be equipped with upper lid; prevent the mixing process and material splash products volatile solvent.

According to the technical requirements and equipment can be made into a cylinder form two or three layers, with a jacket and a heat insulation layer, capable of heating or cooling; according to the requirements of stirring, making the dished end plate cylinder, the bottom is rounded, avoid the dead angle of the mixing process; according to production requirements, can be made into a universal wheel and brake device (easy to move, can at any time or fixed) with forklift slots (available for mobile forklift cylinder or promotion material, can greatly reduce the operation intensity, more conducive to employee workshop production management).

产品参数/product parameters

其它规格可以按要求来定制/Other specifications can be customized