郑州宝晶YGC-12S氮吹仪/12孔水浴氮吹仪/氮吹仪/氮吹仪厂家

郑州宝晶电子科技有限公司YGC-12S水浴氮吹仪

YGC-12S氮吹仪加热方式：

水浴加热方式

YGC-12S氮吹仪技术参数：

型号：YGC-12S(还可以选择YGC-24S，YGC-36S，YGC-48S，BJ-12S，BJ-24S等)

温控范围：室温＋5℃～100℃

温控调节精度：0.1℃

温控精度：1℃

压力调节：0～0.25Mpa

控温方式：数字显示, PID调节,过热保护

加热孔数：12孔（24孔，36孔，48孔）

 YGC-12S氮吹仪主要特点：

1. 每个气道都可同时或独立控制，升降高度可根据试管高度自由调节。
Every air passage is capable of operating simultaneously or independently. The users can adjust freely according to the height of tube.
2. 选取智能温控器，数字显示，PID调节，干式加热温控范围从室温+5~150℃，水浴加热温控范围从室温+5~100℃，满足实验需要，且设有上限温度提醒功能，使操作更加安全。
Choose intelligence temperature controller with a digital display, PID control, the range of temperature is from ambient+5℃ to 150℃(dry bath) and ambient+5℃ to 100℃(water). it is able to fulfill experiment requirement. Built-in heat-triggered protector can make the operation more securely.
3. 经过表面氧化处理的加热块或不锈钢支架（水浴）清洁美观，使用寿命长，可根据要求定制不同孔径模块，满足使用者需求。
Anodized aluminum heating blocks or stainless steel brackets are clean and beautiful, extending using life. We can offer different size holes of the block according the demand.
4. 压力显示使气源的流量控制更加直观，方便流量大小的调节，减少了不必要的气体损耗，节约成本。
The unique design of the pressure gauge can control the flowing more directly, readuce waste and save the cost effectively.
5. 新品可调型氮吹仪克服了以往氮吹仪中氮气流量不均而导致样品不能同时吹干的缺点，每路都配有流量调节装置，使流量的控制更加简便。
The new adjustable Pressured gas blowing concentrators overcome the handicap causes by poor distribution of the nitrogen flow that results it can not blowing the samples at the same time.Every passage has a valve that regulates the flow of a fluid, it make the adjustment more convenient.  
6．如有特殊需求可来电定制。
Please call us if you have special need.

郑州宝晶电子科技有限公司          网址：http://www.zz159.com 

电话：0371-86230029  13523537858